Clik here to view.
How To: Provision Windows 10 with LANDesk OS Provisioning
Reviewed 7/31/2015The basic process for provisioning a Windows 10 device is no different than any other Windows OS, with a couple of exceptions that will be discussed below. Here are the general steps...
View ArticleProvisioning Unmanaged Computers
I am struggling with how to provision unmanaged computers. Before upgrading to LDMS 9.6sp1 using LDMS 9.5sp3 and OSD rather than provisioning, we could get a computer out of the box, boot to PXE use...
View ArticleIssue: OSD.Upgrade.exe error during installation
Applies to LANDESK Management Suite 9 SP3 and newer DescriptionOSD.Upgrade.exe is run during the installation of a LANDESK Service Pack or any LANDESK patch that updates the WinPE image (boot.wim). It...
View ArticleHow do we configure OSD for OS X without an OS X Server? In the Mac...
How do we configure OSD for OS X without an OS X Server? In the Mac Provisioning Webinar QA it says it can be done without an OS X Server, but I can't find any documentation on this.
View ArticleMac OS X Provisioning does not continue after loading NetBoot Image
we have LDMS 9.6 SP 2 without OS X Server for our Mac deployment. We start our tests and all works well. after s few try without any changes our Mac (Apple Macbook Pro 15“ Retina) starts with the...
View ArticleMachines disappear from task
Frequently when I run provisioning tasks some of the machines will disappear from the task. The task may or may not finish successfully, Has anyone else seen this behavior? The provisioning history...
View ArticleIssue: Disconnected template is failing to create on a Remote Console.
Issue:It is failing when trying to copy the image file to the USB drive.Following is in the provisioning.log file with xtrace enabled on the Console computer:ERROR BootMediaHelper 8/3/2015 3:06:08 PM...
View ArticleError: "TFTP Timeout" when attempting to PXE Boot
IssuePXE Boot fails with a "TFTP TIMEOUT" error. This can also present as the following errors: PXE T04 PXE-E36PXE-E32PXE Error M0F CauseThe most likely cause is that the LANDESK PXE MTFTP service is...
View ArticleClik here to view.
How to test drivers compatibility within WinPE
Environment: LDMS 9.6Review Date: 9/15/2014Error Message: DrvLoad: Unable to load X:\InstalledDrivers\...\e1d6432.inf (Error 0x80070002)Problem: When WinPE is attempting to load a driver, it...
View ArticleWinpe bootable usb probelms
hello, We are having problems booting from a winpe bootable usb stick with a Lenovo t450s laptop. We inserted the T450s x64, x86 for w7 ,w8 NIC dirvers but it won't recognise themCan you please help?...
View ArticleClik here to view.
LDMS 9.6 Service pack 2 - provisionning error - Agent deployement
Hi All, I recently installed a SP2 on Landesk 9.6 version. when I tried to provisionning OS i have an error when the task deploy this agents to workstations I obtained an error code 1163 in landesk...
View ArticleProvisioning fails after retry 40 of 40
Hi Guys,Randomly started getting the above and cant figure it out. Things i have tried so far: Trying another templatetrying different clientsrestarting the inventory and schedular servicerebooting the...
View ArticleHow to: Manually install a PXE representative with a USB key
Applies to all versions of LANDESK Management Suite Question: How to manually install a PXE representative with a USB key? You may want to create a PXE representative on a distant managed device on...
View ArticleProfile Transfer in LDMS 9.6
Can anyone point me to a useful document on how to setup profile transfer in LDMS 9.6 . Attempting to create a capture template but not having much success.
View ArticleClik here to view.
How to Create a Provisioning Only User
Purpose This article outlines how to add a Provisioning only user. This will provide rights to Provision devices, while restricting access to other features of the program. Steps Add the user to the...
View ArticleClik here to view.
HII Crashing on boot
I have provisioning working for a few different types of laptops at our organization but it is failing for one specific type. I went through and manually assigned a lot of drivers to it but it is...
View ArticleClik here to view.
How to Provision a UEFI Tablet using ImageW
Purpose This document will outline getting started with provisioning a tablet using UEFI Unified Extensible Firmware Interface (UEFI) firmware..Table of Contents Affected PlatformAssumptionsSamples and...
View ArticleHow can I get provisioning to update registy correctly on x64 OS
Running a provisioning template to build a Win 7 x64 device. Need to update the registry and have tried the Update Registry action item, but it always runs RedgUpdaterHandler.exe not...
View ArticleHow to capture and deploy multiple Hard disks with imagew?
Is there a switch to capture all hard disks? If so what is it if not does anyone have any idea how to accomplish. I have a customer that wants to capture both C drive and D which one is a ssd and the...
View ArticleClik here to view.
No USB drive available for creating Disconnected Template
I'm attempting to create a disconnected template. My LD server is a VM at our datacenter. I can map a local USB drive to my RDP session, but when I select "Create a Disconnected Template", there is...
View Article