LANDESK Provisioning Landing Page
Provisioning for LANDESK Management SuiteThis is a list of highly recommended documents for increasing overall knowledge of this component.The articles listed below are applicable to LANDESK Management...
View ArticleClik here to view.
LANDesk Management Suite 9.5 SP1 - Best Practice HII 9.5SP1 for DELL Computers
I want to show you how I fixed all of our HII Problems in 9.5 SP1 and dramatically speeded up the provisioning process with a few simple steps.We working with this method for weeks now without any...
View ArticleIssues with install service pack 2
Issues with install service pack 2Made inactive in agreement with customer :Last communication:As discussed here is the process you can use to pre-stage the PXE rep deployment.I have edited the current...
View ArticleWhen provisioning, some machines fail to map image repository
Hi. I am experiencing a random and intermittent issue with provisoning, where some machines will get stuck on the System Configuration stage of the Image Template. It ssems that it does not relate to...
View ArticleHII problems with Dell Precision m6800
Hi all, Got our first Dell M6800 laptop in this week, am getting Win7 x64 drivers prepped for OSP with HII....downloaded the latest Dell enterprise driver pack for this model, imported into the driver...
View ArticleAdding Diagnostic ISOs to PXE F8 Boot Menu
We used to have this in our PXE server and unsure what happened but long story short: We want to know how to add tools like clonezilla, memtest, etc to our PXE server F8 menu so that we can boot them...
View ArticleHow to migrate from XP to Windows 7 in LDMS 9.0 using Provisioning
Applies to LANDesk Management Suite 9.0 This article discusses many topics related to provisioning. It is recommended to read and understand all the Provisioning Basics and Provisioning Tips and...
View ArticleClik here to view.
Client stays active
It always happens again, that a client stays active in the provisioning task, but when I look trough the Provisioning history all actions are done.I checked the ldprovision.log and it seems, the client...
View ArticleClik here to view.
How to: Create a LANDESK Query to find all PXE Representatives
Purpose:How to query for machines that are PXE representatives.A typical scenario for building such a query is to find out of there is more than one PXE representative on a subnet. The default "PXE...
View ArticleError: PXE-E74 bad or missing PXE menu and or prompt information
IssueThe following error occurs when attempting PXE boot:PXE-E74 bad or missing PXE menu and or prompt information No F8 boot menu appears.The proxy IP indicates the correct address.Re-deploying the...
View ArticleIssue: Unable to add devices to the Bare Metal Server view
Issue:After adding a device using the "Add Bare Metal Server" wizard, no new device shows up in the device list. To add Bare Metal device entries to the console, the following steps should be taken:...
View ArticleHow to troubleshoot the Configure Target OS (CTOS) action in Provisioning...
One of the most common uses of Provisioning is to extend the capacities and functions of imaging or new device deployments to include the installation of the OS as well as configuration settings and...
View ArticleReboot action : Boot to managed WinPE (=PXE simu)
Hello, In a provisionning template, we can choose the action "Reboot/Shutdown" and then use "Boot to Managed WinPE(Virtual Boot)" to simulate a PXE boot. The big problem is that the boot.wim image is...
View ArticleVBOOT from Preferred server 9.6
Currently in 9.5 we have a home grown way to vboot from the sites preferred server so we don't have to keep pushing the 200+ meg wim file across the wan link to the target devices at remote site....
View ArticleClik here to view.
Error: "Unable to find template for computer IDN xxxx" appears many time in...
IssueProvision.log on the core server is filled with these linesfor Unable to find template for computer IDN 11108.The log is similar to this one: ERROR ProvisioningService 3/29/2011 7:29:38 AM :...
View ArticleIssue: Product to Package Mapping is blank after upgrading to LDMS 9.6
Description:This document only applies if you already set up Product to Package Mapping in 9.5 and after upgrading to 9.6 you only get a blank screen when opening it the Product If you just installed...
View ArticleClik here to view.
autochk program not found skipping autocheck After image caputre
We are getting new HP computers. I have a new Windows 7 X64 image. After I run sysprep OOBE with generalize. I shut down the computer. I then capture the image. The capture procedure works fine. When I...
View ArticleClik here to view.
Issue: Preferred Server Name cannot be resolved in Provisioning
This article applies to LANDESK Management Suite 9.6. This article will also work for previous versions, however some steps may vary.Issue:Preferred server fails with error in WinPE Cause:The...
View ArticleClik here to view.
LANDesk Management Suite 9.5 SP1 - Best Practice HII 9.5SP1 for DELL Computers
I want to show you how I fixed all of our HII Problems in 9.5 SP1 and dramatically speeded up the provisioning process with a few simple steps.We working with this method for weeks now without any...
View ArticleClik here to view.
How to Troubleshoot WinPE hanging after selecting an OSD script from the Boot...
Description This issue is characterized by selecting an OSD script from within the PXE Boot Menu inside WinPE, the Boot Menu window disappearing, and then no further pop ups or display windows...
View Article