Deploy Image failing after upgrade to 9.5 sp1
Hello, I was upgraded to sp1 this morning and the first thing that I've seen broken in OSD provisioning is I can't even deploy the image! I'm trying to deploy a Windows 7 image. The...
View ArticleLittle issue with imageW v2.
Hi all, I'm dipping my toe into the imageW pool and ran into a little hiccup, was hoping you guys might be able to help. So installed an image on a 320gb drive, and then captured it again using...
View ArticlePush 32 bit console in template
Greetings.. I've been tasked with creating a few new image templates for our Help Desk. It's a fairly basic template, with a bunch of apps all pre-configured. The HD boss wants her users to have the...
View ArticleBSOD After Image Capture of HP t610 Thin Client
I have an HP t610 thin client and I'm trying to capture an image of it. I found the LANDesk document "HP Thin Client Management with LANDesk Management Suite 9.5.pdf" and followed the instructions for...
View ArticleProvisioning - New C:\ keeps changing drive letters
Hi I have a big of a straonge issue since upgrading to 9.5 Sp1. When we provision, the WinPE image is M, now after the image is deployed, if i run diskpat and look at the volumes on some machine the...
View ArticleImaging mid-2012 macbook air
Hi all, I just got mac imaging working through landesk at the end of last week. Albeit a slow solution, it's what I have to pursuit right now. I've been able to image slightly older quad core and dual...
View ArticleCannot deploy image
We have a new install of LDMS 9.5 SP1. There has been no upgrade as this was a fresh install from the start and this is our first time using LDMS for deployment. We had a test system in our Lab before...
View ArticleHII preview works but not when running HII in regular mode
After updating to 9.5 sp1, HII doesn't seem to be working properly. When trying to image an optiplex 780 with HII it doesn't find any drivers for it. I loaded the HIIClient.exe onto a base 780 machine...
View ArticleLDMS 9.5 SP1 - Some distribution packages not working with provisioning
We are currently testing LANDesk 9.5 SP1 and I have noticed that for some reason there a bunch of distribution packages (some are .bat/others are .exe) that fail under provisioning under System...
View ArticleAdd WinPE Custom Disk to the PXE F8 Menu
Is there an easy way to add a WinPE Custom Disk to the F8 PXE Menu? I have read the following F8Menu.docx document, but it only explains how to create a local boot. I can't seem to figure this one...
View ArticleWIM issues between LDMS 9.0 and 9.5
we have a LDMS 9.0 core server (server1) which pulls it's image (W7-991.wim) from server3.we have a LDMS 9.5 core server (server2) which pulls it's image (W7-991.wim) from server 3. We are using 2...
View ArticleTroubleshooting Configure Target OS action in Provisioning template
One of the most common uses of Provisioning is to extend the capacities and functions of imaging or new machine deployments to include the installation of the OS as well as a number of configuration...
View ArticleOS Provisioning error "unable to read data from file"
Hello guys, on friday and the whole time in the past my OS Provisoning works fine, but today i have got an error during copy the image to the disk."Unable to read data from file" i didnt change any...
View ArticleClik here to view.
How to Troubleshoot WinPE hanging after selecting an OSD script from the Boot...
Description This issue is characterized by selecting an OSD script from within the PXE Boot Menu inside WinPE, the Boot Menu window disppearing, and then no further pop ups or display windows...
View ArticleWindows 8 images
Has anyone made a Custom Windows 8 image that includes a customrefresh.wim for Windows 8 system refresh?Thanks!
View ArticleAll software distribution actions fail in provisioning templates after...
Applies to LANDesk Management Suite 9.Description:After installing SP4, all provisioning templates with Software Distribution actions fail.A provisioning template can be created and contain software...
View ArticleWinPE 4.0 and USB 3
Anyone successfully get USB 3.0 Host and Hub drivers to inject via HII in a Windows 7 image with the new WinPE 4.0 that came with SP1? I used to be able to load the host drivers in WinPE 3.0 to allow...
View ArticleOSD for a lab environment - make it faster
I have been kicking around a few ideas about this and I was wondering if anyone else has got this working. To start with, I am using 9.5 SP1 and been using LANDesk since 8.8 SP4 and still haven't...
View ArticleImageX and Provisioning Template
I am trying to using ImageX in a Provisioning Template and it seems that when the template runs it dosn't know where to find imagex.exe (you don't set a path to the imaging executable in the template,...
View ArticleNETCOM HII Driver manager not working after upgrade to LDMS 9.5 SP1
After upgrading my core server to LDMS 9.5 SP1, NETCOM HII Driver Manager is not working anymore. I still have the menu item for NETCOM in Tools|Distribution but it doesn't open the Netcon wizard in...
View Article