Clik here to view.
Capture Issues
I am having issues with my capture image, I am currently using landesk 9.5. One of the problem seems to be unless I install the landesk agent it will fail and not create the WIM file. This then causes...
View ArticleHII not working in provisioning
Is anyone else having an issue with the hii program not installing network drivers on windows 7? I have a intel network card on a lenvo T series laptop that worked and installed on the pre SP1...
View ArticleClik here to view.
LD 9.5 SP1 HII Driver Management: Disabling Drivers
I have a driver that is causing DISM error 2 when it tries to inject it into a Windows 8 offline image. This causes the whole provisioning task to fail. I tried using the new "Disable Drivers" feature...
View ArticleClik here to view.
LANDesk Provisioning Landing Page
Provisioning for LANDesk Management SuiteThis is a list of highly recommended documents for increasing overall knowledge of this component.The article's listed below are applicable to LANDesk...
View ArticleClik here to view.
Changes to Provisioning Action Handlers in 9.5 SP1
Create PartitionTo reduce the number of actions needed in a template additional options have been included with the create partition action handler. They include the ability to mount the newly created...
View ArticleLANDesk pxe boot creates an inventory entry!
I was testing some Bare Metal templates on 4 machines. I deleted the Bare Metal intentory entries for my 4 machines and booted one of the from the NIC and pressed F8 to see the boot options. I left...
View ArticleModel Specific Drivers in a Provisioning Template
We provision several different models of computers through provisioning templates and HII. It seems that some models are not getting the correct drivers or are not installing at all. Example: We are...
View ArticleV9.5 SP1 HII using a SWD Package
Hi All, Just been working out the new feature of being able to assign a setup based install package to a hardware component that was introduced in v9.5 SP1 to HII. I have it working well but there is...
View ArticleInsert Script action failing to insert unattend.xml since LD 9.5 upgrade
When using a provisioning template that was working successfully under 9.0 SP3, it now fails when trying the inject the unattend.xml file. The issue appears to be with the way drive letters are...
View ArticleError codes in ldprovisioning logs
Trying to get to the bottom of an issue I am having with the deploy profile command in my osd provisioning template using 9.5. The capture profile works fine and the profile can be manually restored or...
View ArticlePXE Representative Deployment Password - LDMS 9.5
LDMS Core recently upgraded from 8.8 to 9.5 Attached are two PXE Rep scripts. 1. PXE Representative Deployment This is the system default script. This loads the environment OKuntilI add a password....
View ArticleNo GUI for apps during provisioning?
Hi, We need to use truecrpyt during the last step of system configuration during provisioning to set the local administrator password. However, it seems that provisioning doesn’t display the...
View Articleproblem with Variables in COPY FILE action
I am working within the SYSTEM CONFIGURATION section of provisioning on LDMS 9.5 unpatched. I need a FILE COPY action to run as one of the last steps in provisioning. The file that I want to copy to...
View ArticleCreate Bootable WinPE CD for Using OSD Script
I was told by LANDesk Support that the community could possibly provide information on creating a WinPE CD for deploying an OSD script. This would be the equivalent of selecting the WinPE Menu (PXE...
View ArticlePush 32 bit console in template
Greetings.. I've been tasked with creating a few new image templates for our Help Desk. It's a fairly basic template, with a bunch of apps all pre-configured. The HD boss wants her users to have the...
View ArticleDHCP Configuration options 66 and 67
DescriptionThis is a follow-up on document http://community.landesk.com/support/docs/DOC-28279. As indicated in that document, options 66 and 67 in the DHCP Scope Options should not be used. However......
View ArticleSoftware deployment in a provisioning template
Prior to 9.5 sp1 I was able to deploy an msi file just by putting for example \\servername\installs$\flash\install_flash_player_11_plugin.msi in the target path and file name field and a /qn in the...
View ArticleUser profile migration
Has anyone been using Profile Migration in LDMS 9.0 sp3?I need to do a ton of hardware refresh and I currently have something that works, migrates all user profiles. However, I'm looking for the...
View Articlecapture profile with outlook file
Hi, When I can capture profile as workstation finished,But I open the *.sma file cannot find the Outlook *.pst(under the path C:\Documents and Settings\user\Local Settings\Application...
View ArticleProvisioning: PXE won't auto boot
Hello, Looking for some expertise in LanDesk imaging here. I recently followed this pdf http://community.landesk.com/support/docs/DOC-22507 even though I'm on Management Suite 9.5. Last week I followed...
View Article