Clik here to view.
Unable to obtain a lock on drive C: popup message
Running LDMS 9.6 SP3When imaging a Windows 10 UEFI computer through Bare Metal when it gets to laying down the image I get a popup about can't get a lock on c and it goes on to say that something has...
View ArticleClik here to view.
loading images from landesk core not from the preferred server
The PC is contacting the core server instead of the preferred server when loading images. Please help
View ArticleClik here to view.
OS Provision Action Return Code
Hi, We have a template that we use for profile migration. It works fine, for the most part. However, we are limited to only one value that is acceptable as a test for success/failure. What I would like...
View ArticleClik here to view.
Windows 10 Enterprise v1703 is ignoring the computername is unattend.xml
Hello everyone: I have a fairly simple unattend file. I use the %ldhostname% variable to allow dynamic naming during the imaging process. I have checked and the injected unattend has the correct...
View ArticleClik here to view.
Domain join failed the error code was 1326
Hello!We have a problem with a domain registration. In the past we created a "private data" variable for password under global variables and it worked fine with all PC models so far. Recently we get...
View ArticleClik here to view.
How to Deploy a Windows 10 Image with ImageX
OverviewThis document contains the steps necessary to deploy a Windows 10 image in provisioning using ImageX. Although it mentions Windows 10, the same steps will work for Windows 7, 8 and 8.1....
View ArticleClik here to view.
How to Capture a Windows 7 image with OSD in LANDesk® Management Suite 9.5,...
Applies to LANDesk Management Suite 9.0 and 9.5 IssueHow can a Windows 7 image be captured for use with provisioning or OS Deployment with the LANDesk imaging tool (IMAGEW.EXE)?What mode is required...
View ArticleClik here to view.
Capture Image while windows is running
Is there a way to capture an image windows XP machine while the machine is on.Thanks
View ArticleTaskmanager don't work after rollout 1709
Hello, win10 v1703 is installed on our PCs. Installed with LDMS 2016.3.Now we want to upgrade to 1709. We copied the 1703 package, Change the wim file and let it run. Everything is ok. Win10 1709 is...
View ArticleClik here to view.
WinPE and Remote Control LDMS 2016.3
We are trying to enable Remote Control in WinPE during provisioning, in LDMS 2016.3. I've read numerous articles on how to grab folders/files from the ldvpe1.img file, but can't seem to locate that...
View ArticleClik here to view.
One touch computer setup
Hey guys,Just wondering how everyone else does their one touch computer imaging. I'm getting started with this and would like to get to the point where the base image is laid down, drivers, then...
View ArticleClik here to view.
WinPE drivers for VMWare Windows guests
Issue: You boot into WinPE from a VMWare Windows guest device configured with the VMXNET3 network adapter and/or the PVSCSI disk controller. In WinPE you don't have network and/or you don't see any...
View ArticleClik here to view.
provisioning actions are not retrieved and provisioning GUI is empty
Hi, I am running on weird situation I never saw before with just one computer in one location. The Windows PE is loaded successfully and the startnet.cmd script is running until it reaches the step "A...
View ArticleClik here to view.
Issue: Unable to obtain a lock on drive C:
OverviewDuring provisioning while deploying or capturing you may get the following error. Most commonly this error occurs when deploying an image but can occasionally occur during capture as well....
View ArticleClik here to view.
No Boot Device Found after exiting WinPE
When Imaging machines with UEFI enabled i am running into a problem after rebooting from WinPE. the first reboot does not see the hard drive. If you check BIOS before it attempts to boot there is not...
View ArticleClik here to view.
Windows 8.1 Deployment: BCD error after image is dropped
Greetings all, I have been working on setting up our new Windows 8.1 deployment and have encountered a problem. After I deploy the image via the LANDesk template and the computer reboots I get the...
View ArticleClik here to view.
loading images from landesk core not from the preferred server
The PC is contacting the core server instead of the preferred server when loading images. Please help
View ArticleClik here to view.
Template is not being picked up - runs through the 40 tries
I'm pretty frustrated with an issue in provisioning. The issue appears with new computers that never have been in the Landesk database or with computers that were deleted because they didn't report in...
View ArticleMBSDK - create / start a provisioning task in WinPE
I'm still very new to Landesk. I'm trying to set up a menu that allows you to choose between various templates while in WinPE. So basically I want to have one basic template with nothing in it but the...
View ArticleClik here to view.
Unable to deploy image to Surface pro
I am having a very hard time getting an image to deploy to a surface pro 3 The deploy image handler gives me this error each time. 2018-02-02 22:39:57(3044-2140) DeployImageHandler_x64.exe:Replacing...
View Article