Clik here to view.
About HII Driver Selections
Problem Hardware Independent Imaging (HII) selected the "wrong" driver. Cause HII reads the devices on a machine, and gathers their corresponding Hardware IDs. Then drivers are read from the HII...
View ArticleClik here to view.
How to capture and deploy Linux images?
Are there steps any where that shows how to capture and deploy Linux images using LanDesk 9.6?
View ArticleClik here to view.
Error: PXE-E21: "Remote boot cancelled" when PXE booting
Issue Booting a machine in UEFI mode in a network segment with an active PXE representative doesn't make the machine loading WinPE.The PXE menu doesn't appear.The machine reports the error PXE-E21:...
View ArticleClik here to view.
How to deploy software packages using run from source during provisioning in...
Environment LANDESK Management Suite 9.6 Review Date October 2014 Issue Provisioning is not aware of the scheduled task settings available for software distribution such as the the option to run the...
View ArticleClik here to view.
Capture Profile not executing
LANDESK 9.6 Disclaimer: I have configured and implemented OSD and Provisioning for years and am very comfortable with the toolset. However, this is my first foray into Profile Migration using...
View ArticleHow fast should OSD be?
How fast should landesk image? I am only talking about the image copy process speeds not including sysprep and all of that. I have our landesk servers and share’s running at 10 GB. I have tried doing...
View ArticleClik here to view.
How to: Modify a computer's offline registry from WinPE
IssueSometimes it becomes necessary to make changes to the Windows registry in a machine that cannot be booted into. This can be especially important when troubleshooting things like a machine...
View ArticleClik here to view.
VBOOT from Preferred server 9.6
Currently in 9.5 we have a home grown way to vboot from the sites preferred server so we don't have to keep pushing the 200+ meg wim file across the wan link to the target devices at remote site....
View ArticleImage capture error
HI, I am having two issues. The devices i am trying to image are Dell Z90 Windows 7 Embedded Standard - 32 bit operating system units. which have been fully customised for our needs.oh and the unit as...
View ArticleMultiple PXE Representatives in environment booting up with same error message
Hi All, I have tried find solutions to this issue of mine, but have not been successful till now. I have just recently setup multiple PXE representatives in my respective subnets (1 for each subnet)....
View ArticleClik here to view.
How to Troubleshoot the PXE Boot process using Wireshark
Note: This article is a work in progress, however it has proven very useful in it's current state for troubleshooting, so it is being made public even though it is not complete. This document applies...
View ArticleUnable to add Bare Metal Servers on Remote Consoles LDMS96
Can someone please tell me if this is a bug or is it by design? We can see the SCN file get created under the \\coreserver\ldlogon directory but the bare metal server never gets committed to the...
View ArticleClik here to view.
New Core, PXE Provisioning not working properly (maybe easy solution?)
We're doing a side-by-side migration, and we seem to be having issues testing OS deployments. I knew this would be an issue, hence the side-by-side. We were at 9.0 SP3, new one is at 9.6. I wasn't here...
View ArticleClik here to view.
Unattend getting truncated after generalize pass
I have been fighting with this intermittent issue and spending way too much time on it. It is maddening since it will fail 3 times in a row and then succeed without any modifications whatsoever on the...
View ArticleClik here to view.
HP Embedded agent fails to install after upgrade 9.5 -> 9.6
Hi all, After upgrading a LDMS 9.5 environment to version 9.6 the installation of the Embedded agent fails in provisioning. I have used the scripts from the community as a template (HP Thin Client...
View ArticleAdding Diagnostic ISOs to PXE F8 Boot Menu
We used to have this in our PXE server and unsure what happened but long story short: We want to know how to add tools like clonezilla, memtest, etc to our PXE server F8 menu so that we can boot them...
View ArticleWhen provisioning, some machines fail to map image repository
Hi. I am experiencing a random and intermittent issue with provisoning, where some machines will get stuck on the System Configuration stage of the Image Template. It ssems that it does not relate to...
View ArticleHII problems with Dell Precision m6800
Hi all, Got our first Dell M6800 laptop in this week, am getting Win7 x64 drivers prepped for OSP with HII....downloaded the latest Dell enterprise driver pack for this model, imported into the driver...
View ArticleHow to capture and deploy Linux images?
Are there steps any where that shows how to capture and deploy Linux images using LanDesk 9.6?
View ArticleCannot download boot.wim on preferredserver with UNC
hello, I can't use HTTP on PreferredServer.so when i use provissioning with a device who have agent, Landesk want download WIM ... with http on core server on WAN. .... how to use landesk with UNC for...
View Article