Clik here to view.
How to add drivers to the WinPE Image (formerly KB #3469)
This document was formerly KB article 3469.DescriptionIf the WinPE image used for OS Deployment does not already contain a driver for certain hardware such as the network adapter or the SATA, SCSI, or...
View ArticleLosing drivers and partition sizing on OSD deployment
A bit of a newbie in OSD, so I need some input as to my issue with OSD.Are using LDMS 9.5 SP2. Imaging a Dell E7440.My steps have been: On source PC configuring with WIn 7, install apps etc. Start...
View ArticleUSB 3.0 Schedule Task failing - says not enough storage available
Hello, I have been using LANDesk 9.5 SP1. My workaround for USB 3.0 is to create a driver package and Assign via HII. Recently, when testing a new Distro Task (Type = Executable), the Scheduled Task...
View ArticleClik here to view.
Getting started with OS Deployment (OSD) for Windows 7 in LANDESK® Management...
Issue:How do you set up OSD to deploy a Windows 7 image with the LANDESK imaging tool (IMAGEW.EXE v2)?How can an image be captured for use with OSD? Resolution: Quick ReferenceThe general overview of...
View ArticlevBoot: Save a Image local on a PC
Hello, After some research about vBoot I found this Script:http://community.landesk.com/support/docs/DOC-9980 My question is, is there a possibility to change this script so that it download the Image...
View ArticleHang after reboot action
Hi We install several software during the provisioning, one software needs a reboot after installation. So we put in the reboot action in the template. When we start the scheduled task from the...
View Article9.5 SP1 HII Assigned Driver Package fails return code 1
We have been using 9.5 SP1 HII assigned drivers packages for install within Windows for a couple months now. It has been correctly identifying the needed assigned driver packages and installing them....
View ArticleLenova M93 WinPE network drivers
Hi, I am trying to add the Network drivers for M93 model to winpe and it fails to obtain IP address everytime. I am using LANDesk 9.5 with no service packs. If anyone have luck with adding the drivers....
View ArticleLenovo Tablet2 provisioning
Has anybody had any sucess provisioning a Lenovo Thinkpad Tablet2 device? We're running 9.5 SP2, and I cannot get it to boot from a Provisioning Boot medium writen to a USB stick. The tablet is 32bit...
View ArticlePorting existing image over to landesk Provisioning
Our department had been previously using FOG for imaging machines. I took our base image and imported it into a virtual machine for the convenience of having snapshots at various parts of image...
View ArticleProvisioning template-System Config-Distribute software
Hello,I am new to LANDesk and I'm trying to create a provisioning template to install Win 7 x64 and install certain applications. So far I've been doing ok. I can get the image deployed and...
View ArticleUpgrading Landesk 9.0.3 to 9.5sp2
Is it possible to upgrade the 9.0.3 client to 9.5.2, without installing the 9.5 client, then the 9.5 sp1 client and then the 9.5 sp2 client?
View ArticleClik here to view.
waiting for ProvisionGUI.exe to start. timeout is 10 minutes. HOW TO EXTEND ?
Hello, We are deploying Windows seven in all european coutries. (Landesk management 9.2, IIS) The core server is located in Berlin and some network link is poor (we have local repository for the images...
View ArticleLANDesk 9.5 SP1 PXE Rep
hi, I am getting the F8 option and selecting WinPE Menu but then getting TFTP download failed. i've never had an issue before and have been struggling to find any solutions.
View ArticleEvery action afer HII fails in our template
This is a brand new core server with LANDesk SP2 installed. We do have a case open but I wanted to post this to the community to see if anyone else has seen this. HII runs normally and is sucessfull...
View ArticleIssue: Cannot drop OSD scripts on the PXE Boot Menu in the Console
Issue:Using Remote Desktop to remote into the Core Server.When dragging OSD scripts to the PXE Boot Menu, the icon never changes to the plus so it cannot be dropped on the menu.Cannot add OSD scripts...
View ArticleHow to sysprep a Windows 7 master image more than 3 times
A common scenario for Windows XP was to make a master image on a system, sysprep it, create the image, and build on that master image for the next version of that image. Windows 7 made this difficult...
View ArticleHow to image devices with a LANDESK Agent installed
IssueImaging a device with a LANDESK Management Agent installed can cause the devices that receive the image to overwrite each other in the database. CauseLANDESK inventory looks at a Unique ID/Device...
View ArticleIssue: Scheduling a provisioning template as a policy makes it starting as a...
Environment LANDESK Management Suite 9.5 Issue Scheduling a provisioning template with a policy distribution method makes the task starting as a push.Starting a provisioning task for the devices that...
View ArticleClik here to view.
Unattend getting truncated after generalize pass
I have been fighting with this intermittent issue and spending way too much time on it. It is maddening since it will fail 3 times in a row and then succeed without any modifications whatsoever on the...
View Article