Capture Profile action is failing with a 259 error.
Applies to LANDesk Management Suite 9.5 and 9.5 SP1Issue:Capture Profile action is failing with a 259 error.Capture profile action is getting a timeout error.Cause: Capture Profile action has a 5...
View ArticleLenovo T440S Provisioning Issue
Hello, I have been trying to get the provisioning to work but it wouldn't get an IP address. It would say "Waiting for IP address" and timed out eventually. When I typed ipconfig /renew, I get an...
View ArticleHII assigning new drivers of a specific PC model and maker to old PC's models...
Hi there, I'm facing a critical issue with HII (LDMS 9.5 sp1) when adding new drivers for different computer models that I have tested and approved for these specific PC's models (Dell Latitude E6x40,...
View ArticleClik here to view.
LANDesk Management Suite 9.5 SP1 - Best Practice HII 9.5SP1 for DELL Computers
I want to show you how I fixed all of our HII Problems in 9.5 SP1 and dramatically speeded up the provisioning process with a few simple steps.We working with this method for weeks now without any...
View ArticleLandesk 9.5 sp1 Hii Best Practices
We are looking into Hii for imaging moving forward.....I can't find a document explaining the process Is there a lot of issues with 9.5 sp1 hii? I've seen quite a few unanswered posts regarding blue...
View ArticlevBoot: Save a Image local on a PC
Hello, After some research about vBoot I found this Script:http://community.landesk.com/support/docs/DOC-9980 My question is, is there a possibility to change this script so that it download the Image...
View ArticleMTFTP Server doesn't have an IP address?
So, we swapped out to different switches at the end of last week, which caused all kinds of grief, which for the most part has been sorted out. We were having some DHCP errors, and when I'd try to boot...
View ArticleUpgraded to 9.5 SP2 but can't find windows 8 drivers for Dell computers
I understand by upgrading to 9.5 SP2 that Winpe requires Windows 8 drivers. My computers are on Windows 7 and a few on XP.I have searched Dells web site and cannot find Windows 8 drivers except for...
View ArticleLosing drivers and partition sizing on OSD deployment
A bit of a newbie in OSD, so I need some input as to my issue with OSD.Are using LDMS 9.5 SP2. Imaging a Dell E7440.My steps have been: On source PC configuring with WIn 7, install apps etc. Start...
View ArticleLANDESK Provisioning and OSD fail after enabling FIPS on the core server
Issue After enabling FIPS on the core server, LANDESK OSD scripts and Provisioning templates stop working. After selecting and trying to launch an OSD script, nothing happens and the screen stays on...
View ArticleClik here to view.
UEFI network boot PXE error: PXE-E21: Remote boot cancelled
Issue Booting a machine in UEFI mode in a network segment with an active PXE representative doesn't make the machine loading WinPE.The PXE menu doesn't appear.The machine reports the error PXE-E21:...
View ArticleError: You cannot service an x86-based image from an x64-based host that does...
Environment LANDesk ProvisioningWinPE x64Target machine booting in UEFI mode Issue Trying to deploy an x86 operating system image on a device booting in UEFI mode fails.More specifically, WinPE x64 is...
View ArticleProvisioning Task failing after try 40 of 40
Issue The provisioning task is failing to load. It will attempt to load the template and retry for 40 attempts and then the job hangs and the client stays in the WinPE screen or brings back the...
View ArticleHow to use CSVIMPORT.EXE to import devices
Question: How to properly use CSVIMPORT.EXE to import devices. In order to properly import devices Network view, the proper formatting, syntax, and network information must be supplied. Answer:...
View ArticleClik here to view.
OSD/Provisioning: problem deploying WIM image after upgrade to 9.5 SP1
Environment LANDESK Management Suite 9.5 SP1 Issue After upgrading to 9.5 SP1, some software within a WIM image is not working properly anymore. You might receive the following error when booting...
View ArticleHow to use HIICLIENT in preview mode
Applies to LANDesk Management Suite 9.5 SP1 and newer DescriptionHardware Independent Imaging allows drivers to be injected during the imaging process specific to the destination hardware. During...
View ArticleWinPE image – Background changes not taking effect on WinPE images
Applies to LANDESK Management Suite 9.5 SP1 and olderThis issue was resolved in Service Pack 2IssueWhen changing the background image WinPE, the changes seem to take effect but when the PXE client...
View ArticleSchedule option
Applies to LANDesk Management Suite 9.0 SP3 and newerIssueCannot right-click a provisioning template to schedule it.Schedule option is greyed out.Cannot schedule OSD scripts.Cannot create OSD...
View ArticleHII is not installing the correct drivers for Windows XP clients
IssueWindows XP clients are not installing the drivers added to HII.Incorrect drivers are getting installed when using HII. CauseForward slashes (/) were used in the path for the drivers instead of...
View ArticleHII Driver Database
Applies to LANDESK Management Suite 9 SP3 and later The Hardware-Independent Imaging (HII) Driver Database is created after clicking Save in the HII Driver Repository Manager. It contains information...
View Article