Image Capture in Provisioning Task Error
I'm attempting to perform a capture through a Provisioning task and I am recieving a Return:-1 every time. I have mapped the drive location I want the image to copy to. I have tried the following...
View ArticleCapturing OS stuck at Boot Server IP - WinPE Menu
Hi, We are trying to setup OS deployment with LANDesk following the steps in this document - "How to Capture a Windows 7 image with OSD using Imagew.exe v2 in 9.0 SP2 & SP3 and 9.5" We are running...
View ArticlePreferred Server setup for single Core Server
Hi all, We have one core server on 9.5 SP1 which I'm trying to get up and running to replace our old box. When I try to do HII, it tells me I need to configure a preferred server first - fair enough....
View ArticleClik here to view.
Windows 8.1 deployment via Provisioning
Hi all, Anyone had any luck deploying Windows 8.1 via Provisioning yet? I've got the patch installed for support BTW. I've got the easy bits going, it deploys the image and injects the unattend.xml I...
View ArticleTrying to Capture an Image from a ThinClient
Im have troubles trying to capture an image from a HP t5740 ThinClient. I can get it to PXE boot, I then select WinPE Menu, its goes out to the server and I get Windows is loading files...It runs all...
View ArticlePXE Rep stalls on Lenovo X230 laptop at the MTFTP start
Greetings,We have been using our PXE Representative for a few years, and I have found a solution for everything needed so far. This is the first time I have run into this issue without finding the...
View ArticleDeploying an Image fails to inject unattend.xml (Provisioning)
We have begun to convert all of our existing OSD scripts into the newer Provisioning method. I had a little trouble with the Image Capture but was able to get that to work. We are now however stuck...
View ArticlePXE Menu items disappearing or corrupting
I am running SP1 9.5. Since upgrading I have been noticing an increase of OSD scripts that when run aren't starting as well as scripts actually not showing up on the menu. On the PXE Boot menu...
View ArticleProblems with Software Deployment in provisioning templates (since 9.5 SP1)...
Since we use LD 9.5 SP1 we have problems with the Software Deployment in provisioning templates.The Template seems to be installed succesfully. The logged provisiong-process in the console shows that...
View ArticleClik here to view.
How to make provisioning work with WOL
The Goal:To create a scheduled provisioning task, which will deploy a new operating system successfully to the targeted devices regardless if they are online or offline. It is assumed, that a working...
View ArticleProvisioning tasks don't auto boot
Hoping someone can help us out quickly here. We are in the middle of rolling out new workstations to 100+ offices across the country. The first 90% of them have gone fine. Imaging over 1000 PCs so...
View ArticleClik here to view.
OSD multicast fails in LDMS 9.5 SP1
Hi, I'm trying to multicast an OSD image task to some cliet nodes using PXE to boot the client nodes. Once the client nodes are up and the task start to work sending the multicast part for each of...
View ArticleLANDesk 9.5 SP1 - What Happened to the LDMain Share?
We recently updated to LANDesk 9.5 SP1 by installing clean on a new Windows Server 2008-R2 VM. (Essentially we did a "side-by-side" migration. Our previous LANDesk core server, running LDMS 9.0SP4,...
View ArticleUnable to load provisioning template
Hi, We have just upgraded from Landesk 9 SP3 to 9.5 SP1 and I am unable to get provisioning working again. I used to add devices as bare metal and then schedule a deployment and leave it to it. I am...
View ArticleLab PXE boot setup
I need help on installing a lab environment with a close network to use PXE boot on reimaging PCs. This is what I have so far:1. A 2008 server with DHCP server, LANDesk 9.51 also installed on the same...
View ArticleClik here to view.
OSD/Provisioning: Software in WIM image no longer working after upgrade to...
Environment: LANDesk Management Suite 9.5 (with HP ElitePad Integration Update and/or the BASE 0228A patch) or LANDesk Management Suite 9.5 SP1 Description: After upgrading to 9.5 SP1 (or 9.5 with HP...
View ArticleWhat is the required format for importing Bare Metal Servers through a CVS file?
I would like to pre stage about 1500 computers for provisioning and I would like to import those devices as a Bare Metal Server by importing a CVS file. What headers need to be used in the CVS and so...
View ArticleClik here to view.
Partition drive using ImageX to deploy Windows 7
Greetings, We are running LDMS 9.5 sp1 and are getting our feet wet with trying to successfully deploy Win7 using a Provisioning Template. We are in hopes to use provisioning as a mass deployment...
View ArticleCannot schedule any WINPE provisioning templates.
Applies to LANDesk Management Suite 9.0 SP3 and newerIssue:Cannot right-click a provisioning template to schedule it.Schedule option is greyed out.Cannot schedule OSD scripts.Cannot create OSD...
View ArticleBoot wim does not download from PXE Rep on Dell E7240
Boot wim does not download from PXE Rep on Dell E7240. Device has Intel Boot Agent GE v1.5.38.01. MTFTP pops up but then nothing downloads. Anyone else seen issues with this version of the Intel Boot...
View Article