What drivers are loaded in WinPE and which ones are being used by the hardware?

Windows PE is stripped of most of Windows components so we will need to use some external applications to get this information.

• DriverView - This tool will show you all drivers that are currently loaded in WinPE

http://www.nirsoft.net/utils/driverview.html

• DevManView - This will work as an alternative to Windows device  manager, it will allow you to see all your devices like the NIC and what driver it is using.

http://www.nirsoft.net/utils/device_manager_view.html

To access these tools from WinPE you will need to copy them locally using one of the following methods, also you will need to have basic knowledge of how to work with the Windows command line tool,

1. Use the File Transfer option of Remote Control to copy the files to the X:\ drive of the device.
2. Place the files in a network share and connect to it from WinPE

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_use.mspx?mfr=true

   3.  If the problem is related to the NIC and there is no network connection then you will need to include the files directly in to the image.

This document will provide instructions on how to modify the WinPE image.

http://community.landesk.com/support/docs/DOC-7651

NOTE: Make sure to unzip the files before copying them to WinPE.