Hi Guys
Landesk 9 SP3
am currently having issues with just capturing and deploying a XP image. Not using hardware independance, just capturing from same model and deploying to same model of machines.
The Image is captured and deployed and sysprep runs through but then after sysprep has completed on deployment and rebooted the machine immediately bluescreens and loops, there is no chance to actually see what the bluescreen error is.
The Deployment log is fine no error messages are listed no failures.
After Rebooting into winpe I can see that C: is no longer a formatted drive C:\ is shown but no disk status. O Bytes.
Below is the Deployment Log